J30A1 heads on a J30A5?
#1
11-04-2008, 10:06 PM
Unregistered
Posts: n/a
J30A1 heads on a J30A5?
Is this possible? My car apparently has bent valves and according to the Honda dealership the heads and valves need to be replaced on my J30A5 from my 2006 Accord. I cant seem to find any headsfor this motor online or even a motor to purchase besides paying an arm and a leg from the dealership. I do see parts though for the J30A1 and I was wondering if this head swap is possible. Any help is appreciated.
#2
11-14-2008, 12:50 AM
RE: J30A1 heads on a J30A5?
THINK THINK THINK.......3.0 is smaller than 3.5 so smaller heads equal less power and plus its alot of work look on car-parts.com
#3
11-14-2008, 10:59 AM
RE: J30A1 heads on a J30A5?
^^^ A5 head does not equal J35. Think, think, think ..... then read. These are both J30 blocks.
As stated in the other identical thread on with this question, the A5 has a better VTEC system than the A1 and makes more power.
As stated in the other identical thread on with this question, the A5 has a better VTEC system than the A1 and makes more power.
#4
11-14-2008, 01:01 PM
RE: J30A1 heads on a J30A5?
like on the other thread its late and ive been dealing with a j35 motor on another forum and i thought he said j35 ...mmmmm honda oddysey
#6
11-14-2008, 10:24 PM
RE: J30A1 heads on a J30A5?
my friend has a honda minivan j35 in his running 11's its crazy and an AWD accord with aan MDX powertrain
Thread
Thread Starter
Forum
Replies
Last Post
Gibsoncjandsg
Nitrous, Super Chargers, & Turbos
4
11-02-2007 07:46 AM
