alright so i'm in a little bit of a jam. my h22 came without any of the motor mount brackets, i got the front and timing belt side figured out. and i ordered what i thougth was the rear, but i cannot figure out how it mounts to the engine, i think i am missing a piece or something.

I ordered this piece
http://www.lowrideredge.com/tech/030.../photo_25.html

but i cannot figure out how it mounts to the engine, and my engine is supposed to go in monday

for referance here is pictures of the back of the motor
http://i30.photobucket.com/albums/c3...6/IMG_1114.jpg
http://i30.photobucket.com/albums/c3...6/IMG_1113.jpg

am i missing something that bolts into those 3 holes?

any help would be greatly appreciated

 

do you still have the stock accord mount handy? I believe half of the accord mount goes on those three holes then the piece you bought goes from it to the frame.... fire off a pic of the accord mount?

 

yeah i still have everything from the stock engine, They look pretty similar so i thought they might work.

I cant get a pic because the stock motor is still in the car and you cant really get a view of it

 

http://www.innovativemounts.com/Prod...ductCode=29750

 

those are the actual mounts, i'm talking about the brackets that bolt those to the block

 

Those mounts should be all you'll need. You can reuse all your stock motor mounts if you have to.

 

no no no you still arent getting it, its not the actual mounts i am looking for, i have all those, its the brackets, as in the parts that actually bolt to the block.

 

No no, you're not getting it. You can reuse your stock stuff if you have to.

Call up whoever you bought the motor from and ask them for the mounts.

 

kinda hard considering it was scraped