1998 V6 Accord Running Lean, I've got data, and no clue
Super Moderator : And A Texan
Joined: Feb 2007
Posts: 9,652
From: Katy, TX
You can check resistance of O2 sensor (should be 5-15 ohms) on pins 3-4 (lower pins looking at latch on top of connector). If resistance is good, and fault repeats after a reset, then wiring, connector, or PCM.
good luck
good luck
Thread
Thread Starter
Forum
Replies
Last Post
maroonwhitepinstripe
General Tech Help
2
Sep 7, 2011 06:28 PM
