Hey guys I am new here, and I went around looking for any write ups for a CV axle replacement, the only write up I could find was by a user named Colondo, however they were working on a 20010 LX, and a user named deserthonda, which didn't include any pictures, so I am not sure if there's any differences for my EX with Colondo's write up, or if there is a write up for my exact car.

 

Your 99 should be similar enough to the 2001 LX. You might try looking for an Eric the car guy you tube video as well. I haven't changed axles on my 99 yet, but I have done hub bearings, tie rod ends, ball joints (lower) and upper control arms (loaded) and sway bar end links and bushings. Most of it all is similar to a Civic, with only a few minor differences.

 

In the 1998-2002 shop manual, the 1998-2000 differ from the 2001-2002 in part numbers and details like how much grease goes into each CV joint. But the procedures are the same for all those years.