2006 Accord Se 4 Cylinder rotor removal
#1
Unregistered
Posts: n/a
2006 Accord Se 4 Cylinder rotor removal
I am in the process of installing new brakes on my 2006 Honda Accord. I never did brakes on a Honda Accord. I wanted to know what was involved with replacing the frontand rearrotors.After removing the calipers do they slide off of the hubor does the knuckle need to be removed. Thanks Anthony
#2
RE: 2006 Accord Se 4 Cylinder rotor removal
The rotors are over the hub so the should slide off. There might be two screws holding the rotor to the hub.
A Haynes manual would be a good investment (~$20) that has details on maintenance items.
A Haynes manual would be a good investment (~$20) that has details on maintenance items.
#3
RE: 2006 Accord Se 4 Cylinder rotor removal
After the caliper is off, theres one flat-head screw. Use an impact screwdriver, the kind you hit with a hammer.
Then it may be stuck with rust, so spray some PB Blaster. It separates from the hub just outside the projection that engages the center-hole in the wheel.
Then it may be stuck with rust, so spray some PB Blaster. It separates from the hub just outside the projection that engages the center-hole in the wheel.
Thread
Thread Starter
Forum
Replies
Last Post
mieklein
General Tech Help
2
01-09-2014 06:38 AM
Chris Jameson
General Tech Help
1
02-19-2013 06:39 AM