General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

2007 Honda Accord 6cylinder 3.0

Old Apr 22, 2010 | 01:10 PM
  #1  
HondaAccord28's Avatar
Thread Starter
Joined: Apr 2010
Posts: 2
Default 2007 Honda Accord 6cylinder 3.0

Hi, i bought a Honda Accord that was damaged, i replaced the CV Joint, and some stuff on the exterior, but now everything is working fine , except the "Reverse" does not work, it makes a weird noise when it goes in reverse.

Thanks
 
Old Apr 23, 2010 | 11:58 AM
  #2  
hondadude's Avatar
Super Moderator
Joined: Aug 2006
Posts: 2,170
From: Fayetteville, AR
Default

how many pedals are on the drivers floor board?
Can you define "damage" a little better?
 
Old Apr 23, 2010 | 12:22 PM
  #3  
HondaAccord28's Avatar
Thread Starter
Joined: Apr 2010
Posts: 2
Default

There are 2 Pedals, The Brake and The Gas, The Damage is, Is was hit on the Front, Right, I replaced the Fender and Axle, I was able to drive in reverse for a little while, but then it would not work again. It's probablt the Transmission.

Do you know where i can get one for Cheap?

Thanks
 
Old Apr 23, 2010 | 01:47 PM
  #4  
deserthonda's Avatar
Been Around A Long Time Member
Joined: Dec 2005
Posts: 4,754
From: In The Desert ( Sahara ? )
Default

LOL LOL .. i guess it must be AT ,,

make sure axle is all the way in, don't condemn the tranny till you properly diagnose the issue

ohh ,,,, input all the info about your car in your signature ,, it will eliminate asking questions like ( how many pedals on the floor board )
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
95bessy
Tires & Wheels
3
Jul 13, 2012 01:54 AM
brs7024
Engine & Internal
3
Dec 1, 2011 05:20 AM
tufram
General Tech Help
1
Nov 7, 2011 11:58 AM
custy
General Tech Help
3
Jul 17, 2007 11:59 AM
jimymac
New Member Area
2
Feb 21, 2007 11:59 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:31 PM.