General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by:

distrbutor replacement

Thread Tools
 
Search this Thread
 
  #11  
Old 02-22-2011, 05:07 PM
PAhonda's Avatar
Super Moderator
Join Date: Sep 2006
Location: Houston, TX
Posts: 15,637
Default

Glad you solved the problem.

Its kind of strange that the injector would go bad when doing a distributor change. They are not related.

How did you figure this out?
 
  #12  
Old 02-22-2011, 11:06 PM
bigbadwolf078's Avatar
Newest Of Newbies
Thread Starter
Join Date: Feb 2011
Location: gastonia, nc
Posts: 17
Default

i pulled the plugs too a compression check and #4 looked brand new and didnt smell like gas at all....still had the fuel rail from doing my swap and just switched it out and it fired right up....crazy how it worked out tho but atleast it runs
 
  #13  
Old 02-23-2011, 11:45 AM
TexasHonda's Avatar
Super Moderator : And A Texan
Join Date: Feb 2007
Location: Katy, TX
Posts: 9,652
Default

It's easy to get a fuel rail/injector leak that might disable an injector. Could that have happened?

good luck
 
  #14  
Old 02-23-2011, 11:25 PM
bigbadwolf078's Avatar
Newest Of Newbies
Thread Starter
Join Date: Feb 2011
Location: gastonia, nc
Posts: 17
Default

no distrubtor was bad but wait gets even better now just found out the head is cracked in the motor i just put in it....so what can i put in instead of an f22a1 cuz im done with that ****.....any other motor bolt in and use my harness?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
s4m222
General Tech Help
2
12-22-2009 12:31 PM



Quick Reply: distrbutor replacement



All times are GMT -5. The time now is 04:50 PM.