General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by:

Hey look its me

Thread Tools
 
Search this Thread
 
  #11  
Old 01-28-2017, 09:22 AM
TexomaAccord's Avatar
Senior Member
Thread Starter
Join Date: Mar 2014
Location: Texoma, Texas
Posts: 378
Default

This car is taped together with pieces from several different cars... No telling what all has been rigged up on it.
 
  #12  
Old 02-16-2017, 11:35 PM
TexomaAccord's Avatar
Senior Member
Thread Starter
Join Date: Mar 2014
Location: Texoma, Texas
Posts: 378
Default

The engine is a f22a1 -- auto transmission -- Ok, anyone know which other cars have transmissions that will fit?
 
  #13  
Old 02-17-2017, 06:36 PM
poorman212's Avatar
Super Moderator
Join Date: May 2010
Location: Youngsville, NC
Posts: 11,832
Default

Any auto trans from a 4 cyl Accord from 90-97 will fit. Depending on the donor trans there might be some minor wire issues - connectors not matching up but the wires are there.
 
  #14  
Old 02-17-2017, 07:54 PM
TexomaAccord's Avatar
Senior Member
Thread Starter
Join Date: Mar 2014
Location: Texoma, Texas
Posts: 378
Default

Good to know.. What about prelude, acura, etc?
 
  #15  
Old 02-18-2017, 06:41 AM
poorman212's Avatar
Super Moderator
Join Date: May 2010
Location: Youngsville, NC
Posts: 11,832
Default

Yes, the F and H series engines take pretty much the same trans - prelude, yes.....acura of some sorts, yes.

What I'm not clear on with those is where the "year split". I know the Accords went to an electronically controlled trans in 98....I do not know when the prelude went to the electronic controlled trans.
 
  #16  
Old 02-19-2017, 10:55 PM
TexomaAccord's Avatar
Senior Member
Thread Starter
Join Date: Mar 2014
Location: Texoma, Texas
Posts: 378
Default

Discard, Discard, Discard --- lines run to radiator.... going to replace radiator also.. oy vey
 
  #17  
Old 03-18-2017, 03:28 PM
TexomaAccord's Avatar
Senior Member
Thread Starter
Join Date: Mar 2014
Location: Texoma, Texas
Posts: 378
Default

Ok, so installed external trans cooler.. attempted to flush trans (disconnected lines, drained pan, started car, added fluid while catching old fluid in bucket) -- it was clear red fluid, put it in drive, started changing creamy red.. kept adding fluid, would not clear up at all. I let about 15 quarts flow through there, and it still never cleared up 100%.. Tested shift cable. Tried to manually put in reverse, still grinding.. Ugh
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WheelBrokerAng
Off Topic
1
08-21-2013 05:41 PM
WheelBrokerAng
Off Topic
3
03-29-2008 01:46 AM
crazyb3e
New Member Area
9
11-05-2006 09:20 PM



Quick Reply: Hey look its me



All times are GMT -5. The time now is 01:58 PM.