how to add power locks to 1994-1997 4dr accord?
#1
how to add power locks to 1994-1997 4dr accord?
I bought my car used and hate the lack of power locks. I was wondering if you could give me a step by from taking off door panel to how to fish the wires to the fuse box... i'm pretty hopeless with these things... I would really really appreciate it! This is my birthday present from my family and i want to make sure it's a do-able project!
#3
RE: how to add power locks to 1994-1997 4dr accord?
i don't have enough money right now to pay a mechanic to install the actuators, etc, etc... I just need to know if its possible for me... there are already tubes for wire which i assume are intended for power locks and windows... the car is set up for it, i just need to know if sticking the wires through the tubes will make them end up where i need them too... its less important for the front doors than it is for the back doors...
thanks
thanks
#4
RE: how to add power locks to 1994-1997 4dr accord?
wiring harness may or may not be in place for the power locks, if it is you won't need to add it. If it isn't then you have to add it.
Try looking here for diagrams of how stuff is put together....
www.hondaautomotiveparts.com
Try looking here for diagrams of how stuff is put together....
www.hondaautomotiveparts.com
Thread
Thread Starter
Forum
Replies
Last Post
redbull-1
Do-It-Yourself Section
20
01-07-2015 09:37 AM
Opballer
General Tech Help
0
02-09-2012 11:54 PM
Antarctica
General Tech Help
4
10-05-2010 08:33 PM