General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by:

Need procedure on fender removal - 98-02 Accord

Thread Tools
 
Search this Thread
 
  #1  
Old 10-13-2006, 01:58 PM
MiniR34
Unregistered
Posts: n/a
Default Need procedure on fender removal - 98-02 Accord

Just a rough set of directions telling me where to look for bolts or screws is enough. Any special tools required?

Thanks!
 
  #2  
Old 10-13-2006, 02:22 PM
sir_nasty's Avatar
Senior Member
Join Date: Feb 2006
Location: Montana
Posts: 6,290
Default RE: Need procedure on fender removal - 98-02 Accord

Most of the bolts are located under the hood along the ridge running from your windsheild to your headlight, then on the inside of the fenderwell will be about 8 or so self taping screws or just screws in general that hold the plastic skirt to the fender, then open the door of the car and look right in the crack where the door meets the fender and there is usually one or two bolts in there that are attached to the fender, that should about do it.... I may be missing a few but I'm not 100% sure, that should be most of them unless you have one hiding behind the headlight
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Stingray
General Tech Help
4
04-13-2023 06:25 PM
Anse
General Tech Help
2
06-06-2009 05:09 PM
PJ_STYLES_95AccordEx
General Tech Help
2
10-24-2007 09:58 PM
Mr_Accord
General Tech Help
1
04-08-2007 12:14 PM
moto_man
General Tech Help
1
03-26-2007 07:21 PM



Quick Reply: Need procedure on fender removal - 98-02 Accord



All times are GMT -5. The time now is 07:13 PM.