No power at starter

Reply Subscribe

Thread Tools

Search this Thread

Apr 14, 2017 | 10:23 AM

#21

TexasHonda

Super Moderator : And A Texan

Joined: Feb 2007

Posts: 9,652

From: Katy, TX

Use bleeder screw to bleed all air from cooling system.

good luck

Apr 14, 2017 | 11:19 PM

#22

The Toecutter

Been Around A Long Time Member

Joined: Feb 2016

Posts: 1,572

From: Kimball MI

Quote:

Originally Posted by Millwright1693

Found the problem, i forgot to hook up the g101 when i put the head back on. Shes ip and running. Another question, its still getting hott, its overheating but the temp gauge is reading normal. But i also have no heat, im wondering if theres a blockage somewhere. Whoever had it before me added a whole bunch of that head gasket repair stuff, the metalic flake looking stuff. Could that be causing a blockage? Or did i not bleed the coolant system properly?

Did you flush the heater core out? If not, I'd do that now, and then top up and bleed the air out of the system. That metal "stop leak" stuff can clog the heater core and cause a "no heat" situation.
Just my take on it. BTDT before a few times (just not on a Honda).