Headers, Intake, & Exhaust Custom Exhaust? New Headers? Need Opinions on Intakes? Discuss making your Accord breathe better here.

need help on tip size.

Old Jul 3, 2006 | 08:41 PM
  #1  
02BlueAccord's Avatar
Thread Starter
Joined: Jun 2006
Posts: 368
From:
Default need help on tip size.

i ordered the wrong size tip for my 02 accord. its a 4.5in tip and i was wondering wut is the difference between havein the 4.5in tip and like a 3in tip? i know mods make some what of a difference and so far the mods i have is sparkplu wires, ground wires, aem pulley kit, DC-S 4-2-1 headers and a full N1 exhaust system. is a 4.5in tip bad??
 
Old Jul 4, 2006 | 12:51 AM
  #2  
lightshow's Avatar
Been Around A Long Time Member
Joined: Jan 2006
Posts: 1,768
Default RE: need help on tip size.

a 115 mm tip is pretty big. if you have a turbo or are planning on turbo then that would be good. but for n/a thats gonna be pretty raspy. people are going to be holdin their noses when you go by. maybe a 90 or 100mm tip would be better. make no mistake though a 115mm can sound good. make sure that you get a big can and put a resonator in between the cat and the can. greddy and apexi world sport are great muffs
 
Old Jul 4, 2006 | 10:21 PM
  #3  
accord2k's Avatar
Joined: Feb 2006
Posts: 109
Default RE: need help on tip size.

yeah that big of a tip looks pretty ricey
 
Old Jul 5, 2006 | 02:07 AM
  #4  
02BlueAccord's Avatar
Thread Starter
Joined: Jun 2006
Posts: 368
From:
Default RE: need help on tip size.

as far as the looks. how will it sound? i have the DC-S 4-2-1 headers goin down to 3in and the tip is a 4.5in
 
Old Jul 5, 2006 | 03:51 PM
  #5  
sir_nasty's Avatar
Senior Member
Joined: Feb 2006
Posts: 6,290
From: Montana
Default RE: need help on tip size.

once you get a higher flow (I.E. a turbo, supercharger, or bore over Naturally Aspirated engine) then it will improve the sound. If you stick with what you have and put a 4.5" on there it's not going to sound that great... That's my opinion anyway...
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
glperez
General Tech Help
0
Sep 29, 2011 10:26 PM
dre707
Headers, Intake, & Exhaust
6
Feb 9, 2011 11:51 PM
juanortanez031278
General Tech Help
5
Dec 28, 2006 11:19 PM
thunder_x
Headers, Intake, & Exhaust
3
Jan 5, 2006 11:29 PM
tommoran2
Appearance
3
Sep 1, 2005 02:33 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:30 PM.