hello i’m new here was hoping someone could help me out asap, i drive a 97 accord se and i did a manual swap. got everything hooked up but kept auto ecu i. i looped the neatrul safety switch instead of doing all the wiring to the pedals and reverse lights and stuff and that checked out i had power. i also made the thing think it was in park. but i went to start it and it just cranks. i checked for spark. no spark. i used the auto distributor because i used the auto harness idk if that’s a problem or not but this motor doesn’t have a crank sensor either idk if that’s what can also be causing it? i’m stuck. no spark or no fuel. i just ordered a jumper so i can use a manual ecu and see if that will work but any suggentions please let me know