What's up HAF it's been awhile. Iv been supper busy for the past 2 years I have not had any time for the Honda game. But guess who has some tricks up his sleeve this year? HAHA this guy!
But sadly I'm not building a accord this time. I have joined the under 2300lbs club....
So with all that being said what's up with the HAF family? What have I missed in the past 2ish years I have been MIA?

 

any guess what motor I'm putting in what car?

 

A 2jz into a ford pinto ???

 

Dang - how have you been. I don't think we've "talked" since like March.

At least you weren't banned this time

I'm sure you looked through the mod room for news...not much. Cam is back but only around every now and then...two volvo's and the mazda so you can't blame him.

Me,,,,,what did ya'll call me once - dumb hick from the south - well there was a post in the room about my job and the wife's illness.

Other than that....pretty much the same from me

Are you in AL or FL now?

 

I'm back in Florida. I got laid off the 2nd time from the welding plant so we decided to move back down to Florida. I got into the electrical field and she now works for Toyota. Things are looking up for us since we have moved down here.
Yeah I know it has been a while I lost your number I have had so many phones since last year. Shoot me a text with your number if you still have mine. If not send me a PM with it.

I haven't really poked around the mod room yet.
Are you working on any hondas right now? I have a surprise that will hopefully be finished by the 1st of the year. I don't have a accord anymore but still stay true to the hondas!!

 

Glad things in FL are working out for ya'll.

I'm down to the 89, 97 Accord and then 07 Pilot. Pretty much just keep them on the road, never was "into" mod's on them as I had the Chevelle for that....small block Chevy's are a dime a dozen

Hey, you know we leave a lot of "room" for things so if you want to keep us up to date on the civic build....I'm for it?

Sent text.....but you replied before I could even type this

 

ok I will just let you know....

shooting for a 220whp goal n/a

jdm h22a

-full rebuild (all new seals gaskets the works)
-h22a micro polish and balance crank
-KS balance shaft delete
-ACL main and rod bearings
-type s pistons
-oem h22a rods (machined for type s pistons)
-Euro R Intake mani or sk2 ultra (haven't decided)
-70mm TB port matched to the head (depending on manifold)
-sk2 pro 1's cams or type s (havent decided)
-BC or sk2 valve train (whatever i can get a better deal on atm)
-PLM long header (RMF replica)
-3" full exhaust
-p28 ecu with dyno tune
-H23 trans (until I can find a lsd h22)
-ESP crx H swap kit (mounts, cross member ect...)

I'm just now waiting on machine shop to free up some time for my build.

 

Glad to see you are back with us..

 

Glad to see you are back with us again..

 

Looks like your going to have a real nice engine when done. Hope the build goes well.