Has anyone here done the CL strut bar conversion on a 7th gen 02-05 Coupe? I read the v6 forum info and heard that it works and it is cheap, but the part numbers that were given on the web site that was given didn't pan out of me. If you have done it, how is it, what are the part numbers, and where and how much did you get the parts from???

 

The part numbers depend on which sway bar you want. The cl-s rear sway is 19mm and im not sure what the cl is.. i want to get the cl-s bar because ive lowered 2", put the 6mt front strut bar on, and have read that the difference in mm'sfromwhat we have stock (14mm)is greater for the cl-s (reduces roll more) than just the cl....From V6P.......

Front/ Rear
AV6 2dr 25.4/14 ~ 11.4
TSX 26.5/14 ~ 12.5
04 TL 6 spd 27.2/20 ~ 7.2
04 TL auto 25.4/17 ~ 8.4
Civic Si 25.4/17 ~ 8.4
Neuspeed 27.2/19 ~ 8.2


Hope this helps. Ive been looking online at places like acuraautomotiveparts.org and cant find the cl-s rear sway....I think im gonna have to get one at a junkyard

 

If you want a strut bar from a CL, here is a link. I put one of these on my 6th gen sedan. Since you have a 7th gen coupe, though, I think you may want something else.

http://www.acuraoemparts.com/delray/...amp;vinsrch=no

 

OK I guess I am looking for the CL-S upgrade and if anyone has done it yet.

 

Just to be clear, Strut or Sway?

 

Sorry sway bar

 

Sorry, I don't know if CL sway bars fit 7th gen, but I do know that TL-S sway bars fit 6th gen sedan.

 

from what i understand on V6P the 6th gen and 7th gen sways can be interchanged. heres the quote "CL rear sway bar fits 7gen Accord-> CL rear sway bar fits 6gen Accord -> 6gen Accord aftermarket sway bar will fit 7gen Accord." hope this helps...if I cant find a CL-S rear sway for less than $127 I might start looking for 19mm 6th gen rear sways...