Honda Accord Forum - Honda Accord Enthusiast Forums
CDA-9851 with an EQ below
CDA-9851 with an EQ below
0 2018/12/22 09:32:40
CDA-HD149BT with a custom blank plate
CDA-HD149BT with a custom blank plate
0 2018/12/22 09:31:53
CDA-7930 with the lower pocket kit
CDA-7930 with the lower pocket kit
0 2018/12/22 09:31:16
Changer in the glovebox
Changer in the glovebox
0 2018/12/22 09:28:21
CDA-7930 with a meter kit in the dash
CDA-7930 with a meter kit in the dash
0 2018/12/22 09:28:21
PXA-H701 controller in place of sunglass holder
PXA-H701 controller in place of sunglass holder
0 2018/12/22 09:28:21
passenger is the same as driver
passenger is the same as driver
0 2010/08/15 09:15:20
kicks with Oz-180 and Oz-100 - notice how i lost no space - everything is flush with factory
kicks with Oz-180 and Oz-100 - notice how i lost no space - everything is flush with factory
0 2010/08/15 09:15:20
kicks with BXT II
kicks with BXT II
0 2010/08/15 09:15:20
IB wall is 3/4" MDF coated in resin with T-nuts for driver mounting then carpeted.
IB wall is 3/4" MDF coated in resin with T-nuts for driver mounting then carpeted.
0 2010/08/15 08:56:05
false floor carpeted
false floor carpeted
0 2010/08/15 08:56:05
false floor is MDF coated in resin for water resistance
false floor is MDF coated in resin for water resistance
0 2010/08/15 08:56:05
trunk with false floor installed
trunk with false floor installed
0 2010/08/15 08:54:58
better shot of the trunk well
better shot of the trunk well
0 2010/08/15 08:51:48
IB sub wall from trunk side, with xtant amps and H701 brain
IB sub wall from trunk side, with xtant amps and H701 brain
0 2010/08/15 08:51:48
IB sub wall from cabin side
IB sub wall from cabin side
3 2010/08/15 08:51:48
lit up
lit up
0 2010/08/15 08:48:27
H701 controller
H701 controller
0 2010/08/15 08:48:27
dash HU with meters
dash HU with meters
0 2010/08/15 08:48:27
Alpine CDA-7930 and the meter bank
Alpine CDA-7930 and the meter bank
0 2010/08/15 08:46:21
You can see everything up front in this pic - processor brain up high, HU and meters, kicks, tweeters, etc., but the changer is hidden
You can see everything up front in this pic - processor brain up high, HU and meters, kicks, tweeters, etc., but the changer is hidden
0 2010/08/15 08:46:21
You can see everything up front in this pic - changer, processor brain up high, HU and meters, kicks, tweeters, etc.
You can see everything up front in this pic - changer, processor brain up high, HU and meters, kicks, tweeters, etc.
0 2010/08/15 08:46:21
carpeted result - the floor has two pieces. one "permanant" piece up near the IB wall, and a removable false floor. Mounting the two OZ-300H subs in the IB wall baffle is next
carpeted result - the floor has two pieces. one "permanant" piece up near the IB wall, and a removable false floor. Mounting the two OZ-300H subs in the IB wall baffle is next
0 2010/06/23 10:20:33
IB wall deadened with BXT II
IB wall deadened with BXT II
0 2010/06/23 10:20:33
IB wall from trunk side - 12 mounting holes are 1/4-20 T-nuts in between the 3/4" MDF layers. Body filler was added on top of fiberglass to help smooth out the surface. More body filler was added after this pic was taken
IB wall from trunk side - 12 mounting holes are 1/4-20 T-nuts in between the 3/4" MDF layers. Body filler was added on top of fiberglass to help smooth out the surface. More body filler was added after this pic was taken
0 2010/06/23 10:20:33
carpeted IB wall and braces
carpeted IB wall and braces
0 2010/06/23 10:19:06
Raammat BXT II deadening on IB wall
Raammat BXT II deadening on IB wall
0 2010/06/23 10:19:06
IB wall mostly complete. two layers of 3/4" MDF, resin and fiberglass
IB wall mostly complete. two layers of 3/4" MDF, resin and fiberglass
0 2010/06/23 10:19:06
accord kick cutting and deadening - factory air duct for rear passengers removed to facilitate power wire routing
accord kick cutting and deadening - factory air duct for rear passengers removed to facilitate power wire routing
0 2010/02/01 23:31:38
accord kick cutting and deadening - drivers side power (dual 4 awg pictured)
accord kick cutting and deadening - drivers side power (dual 4 awg pictured)
0 2010/02/01 23:31:38
passenger wiring close up - speaker wires and signal wires
passenger wiring close up - speaker wires and signal wires
0 2010/02/01 23:29:09
passenger wiring updated - speaker wires and signal wires
passenger wiring updated - speaker wires and signal wires
0 2010/02/01 23:29:09
accord kick cutting and deadening
accord kick cutting and deadening
0 2010/02/01 23:29:09
Oz Audio 300H - 12" free air (IB) subs - soon to be in an IB wall (rear deck is deadened and sealed)
Oz Audio 300H - 12" free air (IB) subs - soon to be in an IB wall (rear deck is deadened and sealed)
0 2010/02/01 23:19:40
Oz Audio components - 6.5", 4", tweet - all this is up front
Oz Audio components - 6.5", 4", tweet - all this is up front
0 2010/02/01 23:19:40
Battery wiring, 1/0 power and dual 4awg grounds
Battery wiring, 1/0 power and dual 4awg grounds
0 2010/02/01 23:19:40
Feb 2010
Feb 2010
0 2010/02/01 23:15:19
Feb 2010
Feb 2010
0 2010/02/01 23:15:19
Got my kicks "cleaned up", awaiting a fiberglass cover. Carpet was stained when I bought the car at 95k mi.
Got my kicks "cleaned up", awaiting a fiberglass cover. Carpet was stained when I bought the car at 95k mi.
0 2010/02/01 23:13:46
Got my kicks "cleaned up", awaiting a fiberglass cover.
Got my kicks "cleaned up", awaiting a fiberglass cover.
0 2010/02/01 23:13:46