Honda Accord Forum - Honda Accord Enthusiast Forums
The finished project.
The finished project.
0 2012/12/13 10:50:03
Tapping into the white/green constant hot wire with a solderless connector.
Tapping into the white/green constant hot wire with a solderless connector.
0 2012/12/13 10:50:03
A handy grounding lug.
A handy grounding lug.
0 2012/12/13 10:50:03
Power outlet and USB port mounting from the back.
Power outlet and USB port mounting from the back.
0 2012/12/13 10:49:20
The power outlet and USB port mounted in the trim piece.
The power outlet and USB port mounted in the trim piece.
0 2012/12/13 10:49:20
The plug for the radio. The white/green wire is hot all the time and is fused.
The plug for the radio. The white/green wire is hot all the time and is fused.
0 2012/12/13 10:49:20
A deburring tool. I recommend one of these for any tool box. Especially if you're the kind of guy who uses wood bits on plastic.
A deburring tool. I recommend one of these for any tool box. Especially if you're the kind of guy who uses wood bits on plastic.
0 2012/12/13 10:48:21
the (somewhat ragged) hole for the power outlet.
the (somewhat ragged) hole for the power outlet.
0 2012/12/13 10:48:21
The hole for the power outlet needs to be 7/8". This is a wood bit but it can be used on plastic if you are very careful.
The hole for the power outlet needs to be 7/8". This is a wood bit but it can be used on plastic if you are very careful.
0 2012/12/13 10:48:21
the back of the USB port. You can see the spring tabs that keep it snug against the trim piece.
the back of the USB port. You can see the spring tabs that keep it snug against the trim piece.
0 2012/12/13 10:47:11
the finished installation of the USB port.
the finished installation of the USB port.
0 2012/12/13 10:47:11
the file I used to make the slot.
the file I used to make the slot.
0 2012/12/13 10:47:11
filed a small orientation slot in the 3/4" hole. Be very careful when you file this slot 'cause once it's in, that's how your USB port will be oriented.
filed a small orientation slot in the 3/4" hole. Be very careful when you file this slot 'cause once it's in, that's how your USB port will be oriented.
0 2012/12/13 10:46:13
Close-up of the USB port. You can see an "orientation" tab on the assembly. This is to keep it from spinning once it is installed. We like this.
Close-up of the USB port. You can see an "orientation" tab on the assembly. This is to keep it from spinning once it is installed. We like this.
0 2012/12/13 10:46:13
The 3/4" hole for the USB port.
The 3/4" hole for the USB port.
0 2012/12/13 10:46:13
A look at the marked locations in context of the whole trim piece.
A look at the marked locations in context of the whole trim piece.
0 2012/12/13 10:45:33
Locations marked for USB port and power outlet.
Locations marked for USB port and power outlet.
0 2012/12/13 10:45:33
The "before" shot.
The "before" shot.
0 2012/12/13 10:45:33
0 2012/12/03 06:20:38
truck1
truck1
0 2012/12/03 06:16:32
front lip installed
front lip installed
3 2013/02/02 12:44:32
new spoiler
new spoiler
0 2013/01/05 18:04:07
new spoiler 2
new spoiler 2
0 2013/01/05 18:04:07
new spoiler 3
new spoiler 3
0 2013/01/05 18:04:07
0 2012/12/03 06:23:16
honda1
honda1
0 2012/11/14 08:41:06
honda2
honda2
1 2012/11/14 08:41:06
101 0042
101 0042
1 2012/11/13 11:33:04
101 0042
101 0042
0 2012/11/13 11:22:49