I just got these halos and put them in today: https://www.kbcarstuff.com/PhotoGall...2DACD98JM%2DYD
ive been reading on how to adjust them so im going to look for the "two screws, controlling vertical and horizontal adjustment" but i have no idea how to wire the actual halo ring. also there are 4 different spots for the bulbs, any recommendations on waht to put where?

 

Halos get wired up to your parking light wires, the one that stays on with the head lights on.

Take a picture of the back of the light.. there should only be two spots for bulbs.

 

you splice the red and black wires to your running lights[:'(]

 

will those work with hb4/9006 bulbs? if not i have a goleneye hid system, can i just buy the bulbs and use the same balast?

 

those are permenet bulbs in the headlights i was about to see if thy work

 

Why must you repeat what has already been said in this thread and others?

The LEDs in the Halo... sort of. You can replace them, but it's difficult. The regular headlight bulbs are not.

I believe all the halo projectors use the smaller H1/H2 bulbs, at least my old ones did. Yes, you can just buy a new pair of bulbs and use them with your ballasts.

 

I meant the permanent projectors i turned my halos green