Sup Guys,

I have a 06 accord EX sedan with Nav. I was installing a AudioControl LC7 from my factory head unit in order to install a 1200 Alphasonik 5 channel amp. I was tedius in ensuring that i followed the instructions correctly and rechecked everything before connecting the - battery terminal and starting the car. When i started the car the NAV asked me for the security code which i entered. The Nav. turned on and worked fine but my radio isnt operating at all and there isnt any sound. Nothing responds when i hit the audio button or when i push the volume in to turn on the radio nothing responds not even on the Nav screen. Am i suppose to enter a security code for the nav and one for the radio?

The only wires that I tapped into from the factory harness when installing the Audio Control LC7 are the ones listed in bold;

2006 Honda Accord Car Stereo Radio Wiring Diagram
Car Radio Constant 12v+ Wire: White/Green
Car Radio Switched 12v+ Wire: Yellow/Red
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Red/Black
Car Stereo Dimmer Wire: Red
Car Stereo Antenna Trigger: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Front Speakers Size: N/A
Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Green/Black
Left Front Speaker Negative Wire (-): Light Green
Right Front Speaker Positive Wire (+): Green/Yellow
Right Front Speaker Negative Wire (-): Gray/Red
Rear Speakers Size: N/A
Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Blue/White
Left Rear Speaker Negative Wire (-): Blue/Black
Right Rear Speaker Positive Wire (+): Pink
Right Rear Speaker Negative Wire (-): Blue/Yellow

I cant understand it? Has anyone ever experienced this? Any help would be greatly appreciated.

Thanks

 

Unfortunately when i purchased the car it didnt come with an owners manual. I wasnt aware that there were two security codes, one for the nav and one for the radio.

Please delete this thread.

Thanks