Where to get a good H22
#1
Where to get a good H22
Ive made up my mind im going to get a JDM H22A for my '91 ex coupe, but im trying to find one at a good price and comes with everything i need to do the swap also i want to find a 5-speed tranny with it if posible.
#2
RE: Where to get a good H22
http://www.acura-parts.net/index.php...&Itemid=26
i think thats a good place
i think thats a good place
#3
RE: Where to get a good H22
#4
RE: Where to get a good H22
im gonna go with the hmotorsonlineH22A 92-95 Motor in what all do i have to do other than hooking everything up. do i have to modify any piping, wires, exhaust, and all that good stuff?
#5
RE: Where to get a good H22
yes you need to modify the wire harness alot, or you can send your f22b1 harness and h22a harness to hasport and they will do it all for you for $300.
can either grind down your motor mount or buy a hasport one.
need prelude radiator hoses.
and the exhaust wont line up, just bring it to a exhaust shop and they can fix it pretty easily
can either grind down your motor mount or buy a hasport one.
need prelude radiator hoses.
and the exhaust wont line up, just bring it to a exhaust shop and they can fix it pretty easily
#6
RE: Where to get a good H22
i picked a h22a-s up a few years ago from a really nice salvage yard in the dallas tx area....
check out import auto salvage in Denton texas, i dont know if they have a page or not, but i was in there a few weeks ago and there was a few h22a's on the floor in there engine section...
check out import auto salvage in Denton texas, i dont know if they have a page or not, but i was in there a few weeks ago and there was a few h22a's on the floor in there engine section...
#7
Unregistered
Posts: n/a
RE: Where to get a good H22
Go to this place, waaay cheaper than everywhere else.
http://www.nagasakijdmmotors.com/catalog/index.php
For some reason prices seem to be cheaper in Canada for this stuff.
http://www.nagasakijdmmotors.com/catalog/index.php
For some reason prices seem to be cheaper in Canada for this stuff.
Thread
Thread Starter
Forum
Replies
Last Post
94AccordEXThesleeper
Engine & Internal
5
12-13-2010 08:08 AM
markg360
General Tech Help
8
12-29-2006 04:16 AM
Thwh
Engine & Internal
1
03-16-2005 02:54 PM