I have a 4cyl honda accord with a front counter balance shaft seal leaking. Can I replace that seal without taking both timing belts off. Just taking the first one off and doing it on the car?

 

I moved your thread from the DIY section to the General Tech Help section. We no longer use the DIY section for help questions.

 

This TSB is for the previous generation Accord; but, it is similar for your Accord. You have to remove the crankshaft pulley.

http://www.tegger.com/hondafaq/tsb/accord/x00-073e.pdf

Also, get the updated and better seal retainer made for your model Accord. See this thread, starting with post #24.

https://www.hondaaccordforum.com/for...t-48592/page3/