92 accord lx auto shifting in and out of o/d
#11
If you have a multimeter, test the resistance on the NM speed sensor. As stated in the link above, it should be within 400 - 600 ohms at 20 degrees C/ 68 degrees F. If not within spec. to replace.
If within spec., unplug harness at TCU, then check for a possible short to ground (i.e., the wiring, etc.).
If within spec., unplug harness at TCU, then check for a possible short to ground (i.e., the wiring, etc.).
Thread
Thread Starter
Forum
Replies
Last Post
Rilex
General Tech Help
1
09-13-2013 07:35 PM
Jessicac1990
General Tech Help
1
10-17-2012 06:15 AM
blackbeauty97
General Tech Help
5
10-12-2011 08:58 PM