General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

belt screeching on cold startup

Old Mar 5, 2007 | 12:49 AM
  #1  
trukid21's Avatar
Thread Starter
|
Member
Joined: May 2006
Posts: 205
From:
Default belt screeching on cold startup

my96' accord 4-cylinder belt squeels when istartit but it does it only when its been idle for sometime(morning, after couple ofhours idle,etc).i noticed this after they Honda dealership had replaced my t-belts.is there a way of adjusting this myself or the dealer has to fix it (1yr.warranty still good)? thanks!
 
Old Mar 5, 2007 | 01:02 AM
  #2  
hondadude's Avatar
Super Moderator
Joined: Aug 2006
Posts: 2,170
From: Fayetteville, AR
Default RE: belt screeching on cold startup

it is pretty easy to adjust the belt tension, but you should take it back to the people that replaced the T-belt; Let them know the problem started AFTER they worked on the car.
 
Old Mar 6, 2007 | 03:51 PM
  #3  
trukid21's Avatar
Thread Starter
|
Member
Joined: May 2006
Posts: 205
From:
Default RE: belt screeching on cold startup

thanks hondadude. i'm taking it in today.but how do you adjust it just for future reference?
 
Old Mar 6, 2007 | 04:17 PM
  #4  
sir_nasty's Avatar
Senior Member
Joined: Feb 2006
Posts: 6,290
From: Montana
Default RE: belt screeching on cold startup

For future referance all you have to do is loosen bolt on the alternator (I loosen all of them for ease of use, don't remove them, just loose) then push out on the alternator to pull the belt tight and re-tighten the bolts, you shouldn't have more than 1/2 inch travel (on the belt) up or down from its normal resting point....

This job is pretty easy, it's really easy with two people... but if it's loose now just ask them to fix it..... Also, when you tighten a belt be sure to inspect it really well, if it looks glossy or glazed replace it, cracked/frayed or extremely hard replace it... use oem honda belts
 
Old Mar 6, 2007 | 09:37 PM
  #5  
trukid21's Avatar
Thread Starter
|
Member
Joined: May 2006
Posts: 205
From:
Default RE: belt screeching on cold startup

thanks sir nasty, i will keep that in mind. i guess i did not look hard enough for anadjusting area on the alternator side. :-)
 
Old Mar 6, 2007 | 09:59 PM
  #6  
sir_nasty's Avatar
Senior Member
Joined: Feb 2006
Posts: 6,290
From: Montana
Default RE: belt screeching on cold startup

future referance....

[IMG]local://upfiles/3079/452CAFD99B254EF890D9483F9013DA18.jpg[/IMG]
 
Old Mar 6, 2007 | 10:08 PM
  #7  
trukid21's Avatar
Thread Starter
|
Member
Joined: May 2006
Posts: 205
From:
Default RE: belt screeching on cold startup

all i could say is YOU ROCK!!! this is great! thanks man,this will really help.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hangfire79
General Tech Help
9
Mar 31, 2013 10:58 AM
golden213
General Tech Help
1
Mar 20, 2011 07:29 AM
bigdawg74
General Tech Help
5
Oct 23, 2010 08:50 AM
cryptonate
General Tech Help
1
Nov 12, 2009 05:09 AM
farango
General Tech Help
1
Feb 11, 2008 08:12 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:40 AM.