Cant get clutch to bleed on CB

Reply Subscribe

Thread Tools

Search this Thread

#21

09-28-2010, 10:48 PM

Shag Wagon

Junior Member

Thread Starter

Join Date: Sep 2010

Posts: 46

Jeez all that fighting and foul words over a defective m/c.

#22

02-20-2011, 05:55 PM

Ingraham7403

Join Date: Feb 2011

Posts: 3

Did this happen to be a Beck/Arnley Master Cylinder?? I am having what sounds like the exact same problem. Just curious, how did you realize it was defective again?

#23

02-21-2011, 05:48 PM

poorman212

Super Moderator

Join Date: May 2010

Location: Youngsville, NC

Posts: 11,832

Quote:

Originally Posted by **** Wagon

Ok I finally threw in the towel and said screw it, lets take out the master cylinder. Sure enough, the bastard was stuck in the "depressed" position, and the rod coming out of it was at a 45degree angle just wobbling around.

I think this is the point where the mc was considered toast.

However, if you situation is different you might want to start your own post.