cant get my a/c to seal up worth ****
#1
cant get my a/c to seal up worth ****
a/c line that connects to the evaporator must be leaking, anyone have a good suggestion to seal it up? i live in az and im going to need ac very soon.
lightshow
lightshow
#2
RE: cant get my a/c to seal up worth ****
ORIGINAL: lightshow
a/c line that connects to the evaporator must be leaking, anyone have a good suggestion to seal it up? i live in az and im going to need ac very soon.
lightshow
a/c line that connects to the evaporator must be leaking, anyone have a good suggestion to seal it up? i live in az and im going to need ac very soon.
lightshow
if it is leaking you need to replace the line ....But by you saying MUST BE LEAKING sounds like you are not too sure...did you put dye in a/c system and you saw a leak from line ?? Did battery acid fall on it and eroded the line ??
by the way ,where in AZ do you live ??
#3
RE: cant get my a/c to seal up worth ****
well i had a leak in my old evaporator, so i just put a new one on, there arnt any other leaks in the system, so i just figured that it has to be one of those two line that go to the evap. i live in tempe, az right off the 101 and university.
lightshow
lightshow
#4
RE: cant get my a/c to seal up worth ****
ORIGINAL: lightshow
well i had a leak in my old evaporator, so i just put a new one on, there arnt any other leaks in the system, so i just figured that it has to be one of those two line that go to the evap. i live in tempe, az right off the 101 and university.
lightshow
well i had a leak in my old evaporator, so i just put a new one on, there arnt any other leaks in the system, so i just figured that it has to be one of those two line that go to the evap. i live in tempe, az right off the 101 and university.
lightshow
#5
RE: cant get my a/c to seal up worth ****
yea no dye yet but yea i charged the system and it leaked out. well im assuming that it leaked out because now the compressor wont turn on after having it charged for one day. i guess there may be an outside chance that when i filled it up it was at a higher temperature and now that the tempurature is lower the pressure just isnt enough to warrant the compressor turning on.
lightshow
lightshow
Thread
Thread Starter
Forum
Replies
Last Post
Michael Bomes
General Tech Help
2
09-09-2012 03:12 PM
ZMan3000
General Tech Help
12
05-15-2008 03:10 PM
fabulous010
General Tech Help
3
03-12-2007 02:36 AM