General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by:

Cruise Control Doesnt Work

Thread Tools
 
Search this Thread
 
  #11  
Old 03-04-2011, 02:14 PM
Adler's Avatar
Member
Thread Starter
Join Date: Jan 2011
Location: Toronto, Canada
Posts: 157
Default

I finally got around to checking out the cruise control.

First of all, I couldnt get the module itself out of the car, Im not sure how its in there.

I got the cable off and found a bit of an issue, I'd like your opinions as to whether it is the cause of the cruise control not working at all.

Here are pics of the damage...

Name:  IMAGE_096.jpg
Views: 1702
Size:  25.5 KB

Name:  IMAGE_093-1.jpg
Views: 1712
Size:  41.4 KB
 
  #12  
Old 03-04-2011, 06:25 PM
TexasHonda's Avatar
Super Moderator : And A Texan
Join Date: Feb 2007
Location: Katy, TX
Posts: 9,652
Default

This is where cable enters the cruise control vacuum actuator. This actuator "pulls" the cable so I don't think this would disable the actuator. I had something similar and used some wire to hold the end stop in place.

Have you check vacuum supply and lines as suggested?

good luck
 
  #13  
Old 03-05-2011, 07:44 PM
Adler's Avatar
Member
Thread Starter
Join Date: Jan 2011
Location: Toronto, Canada
Posts: 157
Default

I strongly doubt that the broken plastic was an issue, but I went ahead and fixed it anyways;

Name:  IMAGE_098.jpg
Views: 1756
Size:  44.7 KB

Name:  IMAGE_097.jpg
Views: 1699
Size:  30.1 KB
That is JBWeld you see on there.

I havent had time to check the vacuum hoses and actuator yet but that is next on the agenda.
 
  #14  
Old 03-06-2011, 08:08 AM
TexasHonda's Avatar
Super Moderator : And A Texan
Join Date: Feb 2007
Location: Katy, TX
Posts: 9,652
Default

I've made similar repairs on plastc items. I've found that embedding a layer of ripstop nylon fabric into the repair greatly strengthens the repair, providing more tensile strength to the epoxy.

good luck
 
  #15  
Old 03-06-2011, 01:06 PM
Adler's Avatar
Member
Thread Starter
Join Date: Jan 2011
Location: Toronto, Canada
Posts: 157
Default

So I took the whole cruise control assembly out, the reason I couldn't get it out before was because I didn't realize that the whole thing came out, bracket and all, not just the thing that houses the diaphragm. I found the problem and it was a pretty sad one. The vacuum hose was detached... sheesh. So now my cruise control works AND I fixed a vacuum leak I didn't know I had.

The hose is pretty tight though, so I may still replace it with one that is an inch or two longer to prevent the same thing from happening again.
 
  #16  
Old 03-07-2011, 06:12 PM
aloha_bruddah's Avatar
Member
Join Date: Nov 2010
Posts: 106
Default

can you take a pic of where this is located??? I tried to follow but got lost.......where exactly is the CC module?
 
  #17  
Old 03-07-2011, 09:19 PM
Adler's Avatar
Member
Thread Starter
Join Date: Jan 2011
Location: Toronto, Canada
Posts: 157
Default

Originally Posted by aloha_bruddah
can you take a pic of where this is located??? I tried to follow but got lost.......where exactly is the CC module?
On the 95 it is right next to the firewall on the passenger side. Right next to the fuse box. It has a cable that runs over the valve cover to the throttle in a big loop. It looks like a cylinder with a cable that goes into it
 
  #18  
Old 03-08-2011, 11:54 AM
aloha_bruddah's Avatar
Member
Join Date: Nov 2010
Posts: 106
Default

ok, i'll look.........don't know if the 93 is any differennt.........thanks...
 
  #19  
Old 03-08-2011, 12:03 PM
TexasHonda's Avatar
Super Moderator : And A Texan
Join Date: Feb 2007
Location: Katy, TX
Posts: 9,652
Default

I believe cruise control actuator on 93 Accord is near the power steering unit on drivers side. If you trace the cable/sleeve from throttle linkage, you have to find it.

good luck
 
  #20  
Old 03-14-2011, 12:00 AM
aloha_bruddah's Avatar
Member
Join Date: Nov 2010
Posts: 106
Default hehe, i suck....help..

so here's a pic of my engine, where am I to be looking????
 
Attached Thumbnails Cruise Control Doesnt Work-engine.jpg  


Quick Reply: Cruise Control Doesnt Work



All times are GMT -5. The time now is 11:48 AM.