Looking for any suggestions, I changed the timing belt and now at 1900 rpm there is a noise that is coming from the engine. Im getting ready to open the timing belt covers but im not sure what to do. I am only guessing that I should take everything apart and start over but I am looking for any advise or ideas that could make this noise?

MVI 3649 - YouTube


MVI 3648 - YouTube

 

See following thread for possible solution. If you removed or replaced the tensioner, this could be the problem.

https://www.hondaaccordforum.com/for...warning-22046/

good luck

 

Thank you, im reading over now.

Any other suggestions for when I tear it apart?

 

Suggest getting a Honda shop manual to guide your work. If you've done once, you know the problems.

good luck