Fixed the codes and wierd noise
Thread Starter
|
Junior Member
Joined: Feb 2012
Posts: 52
Fixed the codes and wierd noise
I was getting codes 300 through 306. The car idled really crappy.
First, I did a half a_ _ fix of the egr passage. I did not remove the throttle body and lifted the upper plenum and reamed out the passage with a pipe cleaner and did not replace the gaskets. It ran a little better but the codes came back. I redid it the right way, I even washed the intake manifold out in the sink like the TSB says. I also reamed out the hole with a larger drill bit.
The chirping noise turned out to be a loose power steering belt.
Now I am good to go.
First, I did a half a_ _ fix of the egr passage. I did not remove the throttle body and lifted the upper plenum and reamed out the passage with a pipe cleaner and did not replace the gaskets. It ran a little better but the codes came back. I redid it the right way, I even washed the intake manifold out in the sink like the TSB says. I also reamed out the hole with a larger drill bit.
The chirping noise turned out to be a loose power steering belt.
Now I am good to go.
Thread
Thread Starter
Forum
Replies
Last Post
Slowaccord
General Tech Help
9
Aug 22, 2007 06:37 PM
mig25
General Tech Help
3
May 24, 2007 03:50 PM
