I took the wish bone like piece off the strut to the lower control arm off, its a 95 accord, any tips getting it lined back up to put the bolt in?

 

You might try loosening the bolts on the lower control arm. It might be something that's in a bind or something that's not allowing it to drop back in place. Another option might be loosening the upper 3 small nuts on the strut.

 

give it a shot when weather gets better, thanx

 

If the lower control arm is too low, put a jack under it and raise it up until the bolt holes line up with the wishbone. Had to do this all the time on my 95 accord.

 

its more like not spread apart far enough to get back on

 

Take the wishbone off the lower strut assembly and verify the wishbone is too narrow by putting it on the lower control arm.

 

I got it on by putting a jack under the lower control arm and raising it above the lower strut then let jack off and luckily it went back,,,thanx