Help with door handle clip?
Thread Starter
Joined: Jul 2012
Posts: 1
Help with door handle clip?
Hello new to the forum, I have a 1996 Accord EX with the 2.2vtec motor if that matters. I recently replaced the stock paper speakers in the door panels the drivers side is fine but the passenger side has some trouble. There is a rod that connects to the inside door handle and to the latch on the door panel itself that pulls the door release. one of the plastic clips on the end of that rod broke, the one that goes into the door panel. Is there a place to get these clips? The rod will not stay in place without them and thus cannot open from the inside. it's very annoying.
Almost A Senior Member
Joined: May 2011
Posts: 290
From: El Paso tx
Hello new to the forum, I have a 1996 Accord EX with the 2.2vtec motor if that matters. I recently replaced the stock paper speakers in the door panels the drivers side is fine but the passenger side has some trouble. There is a rod that connects to the inside door handle and to the latch on the door panel itself that pulls the door release. one of the plastic clips on the end of that rod broke, the one that goes into the door panel. Is there a place to get these clips? The rod will not stay in place without them and thus cannot open from the inside. it's very annoying.
Thread
Thread Starter
Forum
Replies
Last Post
JPodAccord
General Tech Help
2
May 26, 2012 05:10 PM
Motman Idaho
General Tech Help
1
Mar 22, 2012 10:20 PM
Accord6man
Private 'Wanted' Classifieds
0
Jul 9, 2010 01:31 PM
spazz
General Tech Help
2
Jan 23, 2008 07:19 PM
