how to install brake light switch?
Been Around A Long Time Member
Joined: Dec 2005
Posts: 4,754
From: In The Desert ( Sahara ? )
RE: how to install brake light switch?
LIKE falkore siad pretty easy, unplug the connector, use a 14 mm open end wrench to loosen the nut, unscrew the brake switch,,,
when reinstalling, make sure that the plunger on the brake switch is all the way in when brake pedal is released
when reinstalling, make sure that the plunger on the brake switch is all the way in when brake pedal is released
Been Around A Long Time Member
Joined: Dec 2005
Posts: 4,754
From: In The Desert ( Sahara ? )
RE: how to install brake light switch?
ORIGINAL: Gomez
where is it located? do i have to remove my dash?
where is it located? do i have to remove my dash?
No need to remove the dash, it is a 5 minutes job ..very , very easy
get a flash lite, look under the dash and you should see it ..
Been Around A Long Time Member
Joined: Aug 2007
Posts: 6,213
From: Wayne, NJ
RE: how to install brake light switch?
the armature of the brake pedal pushes the plunger in when the brakes are not applied. If you push the brake with your hand with your head under the steering wheel, you will see it ..... use a flashlight as DH mentioned above.
Thread
Thread Starter
Forum
Replies
Last Post
rudeg
General Tech Help
6
Dec 31, 2015 07:23 PM
victorywhity
General Tech Help
4
Mar 24, 2011 09:37 PM
jdelgado
Private 'Wanted' Classifieds
0
Oct 29, 2007 09:49 PM
