Need help prying out the clock
#1
Unregistered
Posts: n/a
Need help prying out the clock
Hi everyone.
I'm trying to replace the bulb that lights up the fan control **** and the mode button for the climate control system in my 99 Accord. Also need to replace the backlight for the hazard button by the clock. I got as far as removing the two screws on the bottom of the panel and. It tried to pry the clock out with a flat head screw driver, but it seems to be difficult. I'm scared that I will slip with the screw driver and scratch the trim or something like that. Any tips on prying the thing out? Should I pry from the bottom, top, or either side? I was trying from the top.
Thanks for any advice to make this process a little easier!
[IMG]local://upfiles/15861/82657668566D495EBB9FAB782CAD36D1.jpg[/IMG]
I'm trying to replace the bulb that lights up the fan control **** and the mode button for the climate control system in my 99 Accord. Also need to replace the backlight for the hazard button by the clock. I got as far as removing the two screws on the bottom of the panel and. It tried to pry the clock out with a flat head screw driver, but it seems to be difficult. I'm scared that I will slip with the screw driver and scratch the trim or something like that. Any tips on prying the thing out? Should I pry from the bottom, top, or either side? I was trying from the top.
Thanks for any advice to make this process a little easier!
[IMG]local://upfiles/15861/82657668566D495EBB9FAB782CAD36D1.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
foxylady23
General Tech Help
3
05-18-2009 12:27 PM