replacing cv axle soon, 97 2.2L
#2
I replaced both axles in my 97 Accord earlier this year.
Did some research and bought EMPI axles online, which are very good quality.
The hardest part of the job was getting the 36mm axle nuts off, actually had to cut one side off with a metabo.
Once I got the nut off and popped the lower ball joint out, I removed the lower fork nut and was able to swing the rotor assembly out of the way and install the new axle.
Glad overall I did the job myself and saved a few $$$$$
Did some research and bought EMPI axles online, which are very good quality.
The hardest part of the job was getting the 36mm axle nuts off, actually had to cut one side off with a metabo.
Once I got the nut off and popped the lower ball joint out, I removed the lower fork nut and was able to swing the rotor assembly out of the way and install the new axle.
Glad overall I did the job myself and saved a few $$$$$
Thread
Thread Starter
Forum
Replies
Last Post
sunny393
General Tech Help
19
12-17-2007 01:46 PM