General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

vibration in gas pedal 06 accord v6

Old Feb 20, 2010 | 08:40 PM
  #1  
arcticf1re's Avatar
Thread Starter
|
Newest Of Newbies
Joined: Dec 2007
Posts: 13
Default vibration in gas pedal 06 accord v6

I notice a vibration about 40% of the time while driving. It is usually while I am holding the pedal with light pressure to maintain speed, either on a highway or upgrade. I bought this car with 28,000 miles 2 weeks ago, have been to honda twice and they say it runs perfect both times, so I go home thinking I just dont how this newer more powerful car (than my 00 v6 accord) drives. Today I took a 3 hour trip and there is definitely a problem. I notice it while holding a steady speed on the highways, usually between 50-65, and at home i notice it while mainting speeds of 40mph, or slight upgrades. The vibration is noticible enough that my left foot (steady on the little foot pad/rest) feels a tickle/itch from all the vibration going up my leg.

Can somebody please give me a hint as to what this could be so I can go to honda and tell them what to look for so they understand and can fix it. fortunately its certified pre-owned so it will be free, but the hassle of back and forth with them is crazy, i need this fixed.

Thanks.
 
Old Feb 21, 2010 | 12:25 AM
  #2  
finch13's Avatar
Been Around A Long Time Member
Joined: Jun 2007
Posts: 7,381
From: St. Paul, MN
Default

Hrm... the vibration is only in the pedal, not the seat or steering wheel, correct?

The throttle on 03+ Accords is drive-by-wire to my knowledge (our 04 MDX with the 3.5 is) so it's difficult to link the vibration to the engine.
 
Old Feb 21, 2010 | 04:53 PM
  #3  
kris_loehr's Avatar
Been Around A Long Time Member
Joined: Aug 2007
Posts: 1,184
From: Chesterfield MI 48047
Default

There is a TSB 07-059 OCT 07 Engine - Excessive Engine Vibration/DTC P0A14
 
Old Apr 9, 2010 | 09:28 PM
  #4  
arcticf1re's Avatar
Thread Starter
|
Newest Of Newbies
Joined: Dec 2007
Posts: 13
Default

What does that mean?

Just had a motor mount replaced, helped some but still some vibration.
 
Old Apr 9, 2010 | 10:14 PM
  #5  
JimBlake's Avatar
Super Moderator
Joined: May 2006
Posts: 18,398
From: Wisconsin
Default

TSB = Tech. Service Bulletin
The dealer should have these so they can read all about it.

DTC = diagnostic trouble code
That's the error code (P0A14) that can be read with an ECU error-code-reader.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2ofakind
General Tech Help
4
Oct 1, 2013 07:35 PM
accord2010
General Tech Help
4
Apr 17, 2013 05:04 AM
bsoa123
General Tech Help
5
May 1, 2012 04:37 PM
CKitts
General Tech Help
1
Nov 2, 2011 05:58 PM
gypsyman
General Tech Help
8
Jun 4, 2007 05:39 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:59 AM.