*98-02 CHEAP* LED CONVERSION [cluster, clock, dome, maps, door, plate]
The '01 used 194/168 bulbs (wedge) for the courtesy (door), map and the trunk lights, and the dome light is a 31mm festoon bulb.
Pretty much if you pop off the cover and it looks like this

It's a 31mm festoon bulb
If it looks like this

It's a 168 or 194 wedge bulb (I have used them interchangably with no negative results so far)
Note: The size of festoon bulbs does fluctuate by about one mm between models, but I think most Accords are 31mm.
Pretty much if you pop off the cover and it looks like this

It's a 31mm festoon bulb
If it looks like this

It's a 168 or 194 wedge bulb (I have used them interchangably with no negative results so far)
Note: The size of festoon bulbs does fluctuate by about one mm between models, but I think most Accords are 31mm.
Last edited by Peli; Dec 3, 2011 at 01:19 AM.
thanks for the replies guys.
I was looking for changing the light on my cluster gauge. (Every single light in there.)
To: Peli:
I remember changing my tail light and its look like the 2nd picture.
So, I guess those are on the side of my door too?
I was looking for changing the light on my cluster gauge. (Every single light in there.)
To: Peli:
I remember changing my tail light and its look like the 2nd picture.
So, I guess those are on the side of my door too?
This is what mine looks like, and yours probably looks similar once you get the cover off. The two sets of prongs hold the bulb.



