I was thinking about upgrading my stock HU to this kenwood. I just want to know if it will fit fine or i need some extra components. Would appreciate the help.

 

you need the Metra 70-1721 wire harness and a mounting kit. there are several mounting kits, i like the Metra 99-7895 for a flush appearance
http://www.metraonline.com/part/99-7895

Instructions for removing your radio:
http://www.metraonline.com/files/pro...NST99-7895.pdf

that's a nice head unit, you'll be happy. install is a breeze. make sure to properly connect the Metra harness and Kenwood harness - i prefer solder and heat shrink.

 

Thank you very much my kind sir!

 

Keep Hope is our Stereo Pro..he speaks with much wisdom...

 

Okay me and my buddy installed it today i must say its 10x better than the stock version. Now will getting new speakers give alil booast to the the sound and volume and should i get get speakers for the front n back or just for the front?

 

spend what you can on front. if you bought both you'd get lower performance (for the same budget).

upgrading the front speakers to a nice component set may be all you need.

 

Ohhh i see what would you recommend then for like 100 bucks orrrrr should i just wait till i get a good amp and sub to experience it fully?

 

Minimum $200 for anything I would put in a friend's car. $500 min for my car.

$200 Hybrid Audio Technologies - Imagine I61-2
http://www.hybrid-audio.com/products.htm

Browse that site and read the owners manual. You will learn a lot about car audio.