Audio/Visual Electronics Wired up? Everyone's got some sort of electrical modification... let's hear about it here.

replacing 6x9's need help

Old Nov 17, 2006 | 07:14 PM
  #1  
kue380
Unregistered
Posts: n/a
Default replacing 6x9's need help

i need to know how the back dash comes off before i break it trying to get it off


96' honda accord le
 
Old Nov 17, 2006 | 09:04 PM
  #2  
sir_nasty's Avatar
Senior Member
Joined: Feb 2006
Posts: 6,290
From: Montana
Default RE: replacing 6x9's need help

you don't need to remove it typically.... open the trunk and look up at the underside of that rear deck lid and I'll bet you'll find that the speakers are just screwed or bolted up into place there, simply remove whatever it is that's holding them in and remove them out through the trunk
 
Old Nov 17, 2006 | 09:34 PM
  #3  
poser_pilot6
Unregistered
Posts: n/a
Default RE: replacing 6x9's need help

I replaced my 6x9s last year, and didnt have to remove the deck. You just take the grill off, unscrew it, and take it out. The screws should go in from the top. Its really pretty simple.
 
Old Nov 22, 2006 | 05:17 AM
  #4  
02BlueAccord's Avatar
Joined: Jun 2006
Posts: 368
From:
Default RE: replacing 6x9's need help

in my 02 accord. there were like 2 or 3 screws that hold the speaker covers. then inside the car there r 4 screws that hold the speaker in place. its a really easy swap.
 
Old Dec 14, 2006 | 12:34 AM
  #5  
Eclips3's Avatar
Joined: Dec 2006
Posts: 12
From:
Default RE: replacing 6x9's need help

All you need to do is, unscrew 3 screws holding the grill down.. But where im stumped, is when you put the 6x9 in.. I bought new 6x9's and they dont fit, ive taken some pics of what im looking at.. if anyone can help, thad be great... I had 6.5" speakers in it, and i want 6x9's in it.. but theyre too small to fit into the hole, after i took out the plate holding the 6.5 in ( shown in pic ).. What should i do? Cut a hole in the plate to adapt it to the 6x9? Plz help! thx,

http://img184.imageshack.us/img184/7...cord003wo7.jpg
http://img98.imageshack.us/img98/803...cord004kr4.jpg
http://img98.imageshack.us/img98/508...cord008ld8.jpg
http://img214.imageshack.us/img214/2...cord010yu5.jpg
http://img144.imageshack.us/img144/8...cord005rz0.jpg
http://img98.imageshack.us/img98/612...cord001ff9.jpg
http://img100.imageshack.us/img100/6...cord002dk6.jpg
 
Old Dec 14, 2006 | 01:12 AM
  #6  
poser_pilot6
Unregistered
Posts: n/a
Default RE: replacing 6x9's need help

Eclips3, what year is your car?
 
Old Dec 14, 2006 | 11:05 AM
  #7  
Eclips3's Avatar
Joined: Dec 2006
Posts: 12
From:
Default RE: replacing 6x9's need help

Its a 94, should be the same as the 96 right? Im new, just bought the car a couple weeks ago.. shes mint! :P

EDIT: Its a 2 door, LX if it makes a difference.. plz help [sm=thanx.gif]
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jcaleno
Audio/Visual Electronics
2
Mar 23, 2007 01:43 PM
jipmpizzle
Audio/Visual Electronics
2
Oct 30, 2006 11:17 AM
accord2k
Audio/Visual Electronics
8
Mar 7, 2006 11:03 AM
Mike_EX
Audio/Visual Electronics
2
Jan 8, 2006 11:26 AM
86AccordGuy
Audio/Visual Electronics
12
May 18, 2005 10:55 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:04 AM.