Hi all,
I removed the P/S seat to replace the downstream O2 sensor on my daughters car w/o removing the connections under it. I leaned on the seat and ripped out some wires from the connector that plugs into a module under the seat. The connector has 3 wires and plugs into the 1st port of the module left to right. The wires have a yellow wire loom protecting them. Can someone tell me what the name of the module is? What is the connector that plugs into the module controlling? And where can I get a replacement pigtail or harness? Also will the airbags still work?
Any help will be much appreciated!
Alex


​​​​​​​

 

Yellow wires are typically the air bag system, so you likely damaged the harness to the side airbags that are part of the seat.