I have a 92 Accord 5 speed DX. The timing is supposed to be 15 degrees BTDC. On the fly wheel there is one mark that says +15 and another that looks like a + . My question is when setting the timing using a timing light which mark should I be seeing/using to set the timing?

Thanks,
CRW

 

Unless you have an aftermarket crankshaft pulley, there should be 3 timing marks at 13-15-17 degs BTDC. Another mark at #1 TDC, 0 degs BTDC is separated from the 3 timing marks.

good luck

 

I think 1992 has the marks on the flywheel, not the pulley??
Look for a download shop manual - link is in one of the DIY threads somewhere around here.