95 accord no lock up converter
#13
The 95 4-cylinder accord is obd1, so you can't use a generic obd2 scan tool on it.
I think your best bet is to back-probe the lockup solenoids with a test light. See if both light up when you get to the point where torque converter should lockup. That information will give you direction of what is next.
I think your best bet is to back-probe the lockup solenoids with a test light. See if both light up when you get to the point where torque converter should lockup. That information will give you direction of what is next.
Thread
Thread Starter
Forum
Replies
Last Post
darkgreen18290
General Tech Help
12
10-24-2012 09:38 AM