Hi Guys!!

spent whole sunday searching DIY sites but couldn't find answer of my query. I am really very frustrated ..... now thinking why I removed wires from ECT coolant temperature sensor connector

My ECT sensor connector was broken ..... Fortunately I found a connector in junkyard and I decided to change it. I removed the wires from broken ECT connector .... but while putting wires to new connector ... I got confused ... There are two terminals in connector and two wires but I am not sure which wire to connect to which terminal ....

- Car: 1998 honda accord LX v6
- Connector: ECT coolant temperature sensor connector with two terminals. For me Terminal 1 is near to connector clip and terminal2 is opposite of clip.
- Wires: Two wires. One is red/white(signal) and green/black(ground)...

Any help will be greatly appreciated.....