99 accord transmisson going out?
Super Moderator
Joined: May 2010
Posts: 11,834
From: Kenton, TN
This, to me, is sounding more like an EGR port issue.
Tylor- look in the "Common DIY Thread" sticky found at the top of this section for a "how to".
Once warm, the car has a slight "stumble" when taking off from a stop - if you look at the rpm gauge when doing this it will happen just as the rpm's get to ~1400. Then when at a "cruise" speed....more like RPM range...where the rpms are @ 1800~2200 there is a miss/stumble in the engine.
Hammer the engine, full throttle, and she runs like a dream thru the rpm range.
Just my two cents, from a poor man
EDIT: Sorry, I don't think there is a write up in the Common DIY Thread sticky for the 6th gen EGR Port cleaning. BUT I'm still with the same answer/idea/thought, clean the EGR port in the manifold.
Tylor- look in the "Common DIY Thread" sticky found at the top of this section for a "how to".
Once warm, the car has a slight "stumble" when taking off from a stop - if you look at the rpm gauge when doing this it will happen just as the rpm's get to ~1400. Then when at a "cruise" speed....more like RPM range...where the rpms are @ 1800~2200 there is a miss/stumble in the engine.
Hammer the engine, full throttle, and she runs like a dream thru the rpm range.
Just my two cents, from a poor man
EDIT: Sorry, I don't think there is a write up in the Common DIY Thread sticky for the 6th gen EGR Port cleaning. BUT I'm still with the same answer/idea/thought, clean the EGR port in the manifold.
Last edited by poorman212; Oct 25, 2012 at 07:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
