Blinker Issue
I try to do maintenance myself. I have a 97 Accord Sedan. Bought it used and the blinkers (all 4) worked fine. A few days ago the inside blinker indicator started flashing fast. The right front bulb went out. The Chilton manual shows a screw holding the lens in the bumper, but I can't see any screw. I was able to change the bulbs, but now both front blinkers are inop. Did I f**k something up?
Either you didn't seat the bulbs correctly or got the wrong bulbs for your accord. Pretty simple fix.
If your bulbs are the wedge-fit, just make sure you got the metal pins on the bulb base lined up with the pins on the car's electrical socket.
If your bulbs are the metal base where you line up the post, just make sure you turned the bulb so it makes contact.
Use your hazards to test all the blinker bulbs at once.
If your bulbs are the wedge-fit, just make sure you got the metal pins on the bulb base lined up with the pins on the car's electrical socket.
If your bulbs are the metal base where you line up the post, just make sure you turned the bulb so it makes contact.
Use your hazards to test all the blinker bulbs at once.
Thread
Thread Starter
Forum
Replies
Last Post
slobjones
General Tech Help
4
Oct 26, 2012 07:19 PM
ZionsWrath
General Tech Help
4
Jan 30, 2008 10:27 PM



