The book states 2.2 qt for transmission oil, can I just put in 2?
#23
The torque for the two bolts should be approximately 30-33ft lb or so. You don't necessarily need a torque wrench, but I tend use one depending on the job. Many people tend to overtighten.
Last edited by 75Gremlin; 04-15-2024 at 08:33 PM.
#25
I am trying to find transmission torque specs for 2017 accord coupe 3.5L V6 Manual transmission. It seems almost impossible, been looking for about an hour and found from several sources, although not sure how accurate: fill plug is 32ft/lb, and drain is 29. Any suggestions on finding this information? You mention 30-33ft/lb, is it ok to not be 100% exact?
#27
REDBULL, THANK YOU! As you can see, I barely know what I'm doing, really learning from scratch. After all of this, I think I'm actually good to go.
Everyone one here has been incredibly helpful. I bought the washers, got the long funnel, got the drain pan, oil, ratchet, extended bar, and torque wrench.
Watched about 5 videos on this.
I should be able to change my own transmission oil now.
Thank you!
Everyone one here has been incredibly helpful. I bought the washers, got the long funnel, got the drain pan, oil, ratchet, extended bar, and torque wrench.
Watched about 5 videos on this.
I should be able to change my own transmission oil now.
Thank you!
#28
I am trying to find transmission torque specs for 2017 accord coupe 3.5L V6 Manual transmission. It seems almost impossible, been looking for about an hour and found from several sources, although not sure how accurate: fill plug is 32ft/lb, and drain is 29. Any suggestions on finding this information? You mention 30-33ft/lb, is it ok to not be 100% exact?
Thread
Thread Starter
Forum
Replies
Last Post
bladest
General Tech Help
2
07-31-2021 05:43 PM
bladest
General Tech Help
6
07-18-2021 02:13 PM