1995 accord ex vtech 4 cylinder. I have found 2 sites that explain how to clean the EGR ports. I'm at the point where I have removed the 3 nuts from the fuel rail but it still will not move/ come loose. Whats next?

Thanks
Bud

 

If the fuel rail is unbolted, it should be able to slide off of the fuel injectors.

There might be some vacuum hoses that you have to remove as well.

 

Does the rail ever stick to the fuel injectors?

 

It should pull loose from the injectors or pull the injectors out of the intake manifold.

The o-rings could stick, but some slight twisting/turning of the fuel rail should loosen the seals.

 

A little twistng done the trick. Thanks for your help. Cleaning the ports seems to have fixed a steady speed miss I had.