Help on 2012 LX iVETC solenoid gasket part#
Thread Starter
Joined: Jul 2020
Posts: 2
Help on 2012 LX iVETC solenoid gasket part#
Planning to replace 2012 Accord LX valve cover gasket due to some oil leak, and would like to replace the iVETC solenoid gasket as well. Spent quite amount of time on internet, just couldn't find the right solenoid gasket. Could someone tell me either OEM or aftermarket part#? Thanks!
Super Moderator
Joined: Sep 2006
Posts: 16,331
From: Houston, TX
I'm not as familiar with the differences between trims on the 2012 accords. I'm also not sure what gasket you are trying to replace. I think you are trying to replace OEM part number 15815-R40-A01, but I am not sure.
The easiest way to find the OEM part number is to go to hondapartsnow.com and use your VIN to get the correct model/trim of your accord. The gasket diagram an OEM part numbers are listed under the engine then vtc control solenoid valve.
The easiest way to find the OEM part number is to go to hondapartsnow.com and use your VIN to get the correct model/trim of your accord. The gasket diagram an OEM part numbers are listed under the engine then vtc control solenoid valve.
Junior Member
Joined: Sep 2017
Posts: 60
I'm not as familiar with the differences between trims on the 2012 accords. I'm also not sure what gasket you are trying to replace. I think you are trying to replace OEM part number 15815-R40-A01, but I am not sure.
The easiest way to find the OEM part number is to go to hondapartsnow.com and use your VIN to get the correct model/trim of your accord. The gasket diagram an OEM part numbers are listed under the engine then vtc control solenoid valve.
The easiest way to find the OEM part number is to go to hondapartsnow.com and use your VIN to get the correct model/trim of your accord. The gasket diagram an OEM part numbers are listed under the engine then vtc control solenoid valve.
Thread
Thread Starter
Forum
Replies
Last Post
