General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

its snowing and no abs

Old Mar 2, 2009 | 06:51 AM
  #1  
jamrock's Avatar
Thread Starter
|
Junior Member
Joined: Oct 2008
Posts: 51
Default its snowing and no abs

94 accord ex 5 speed the abs worked a couple aof weeks ago wen it snowed but i noticed last night when its was snowing the abs wod not operate and the car would just slide didnt notice till this morning that the light ong the dash doesnt even cme on any more any suggestions or does any one know how to check it???
 
Old Mar 2, 2009 | 08:12 AM
  #2  
JimBlake's Avatar
Super Moderator
Joined: May 2006
Posts: 18,398
From: Wisconsin
Default

Does the ABS lamp come on when you first turn on the car (bulb check)?
 
Old Mar 2, 2009 | 11:40 AM
  #3  
jamrock's Avatar
Thread Starter
|
Junior Member
Joined: Oct 2008
Posts: 51
Default

no the light doesnt come on when i turn the ignition on checked all the fuses under the hood and the are good
 
Old Mar 2, 2009 | 11:45 AM
  #4  
finch13's Avatar
Been Around A Long Time Member
Joined: Jun 2007
Posts: 7,381
From: St. Paul, MN
Default

The bulb is likely burned out and the ABS light would be on if the bulb was in good condition. Even if the ABs is non-functioning at the moment, you can still drive in the snow and you will survive . Both of my Honda's didn't have ABS and you can still stop fairly fast without locking up the wheels. Good luck.
 
Old Mar 2, 2009 | 02:40 PM
  #5  
JimBlake's Avatar
Super Moderator
Joined: May 2006
Posts: 18,398
From: Wisconsin
Default

Or replace the bulb so you can check the ABS error codes. It may be something easy to fix.
 
Old Mar 2, 2009 | 03:59 PM
  #6  
finch13's Avatar
Been Around A Long Time Member
Joined: Jun 2007
Posts: 7,381
From: St. Paul, MN
Default

Exactly, but the bulb might have to be purchased from the dealer (I think it's one of the super long ones that looks like an LED but isn't) and even if you get that, you still have to tear apart the 5th gen dash to get the gauge cluster out.
 
Old Mar 2, 2009 | 07:30 PM
  #7  
jamrock's Avatar
Thread Starter
|
Junior Member
Joined: Oct 2008
Posts: 51
Default

does any one know how to check the abs codes and where can i find out wat the codes mean?
 
Old Mar 2, 2009 | 08:32 PM
  #8  
PAhonda's Avatar
Super Moderator
Joined: Sep 2006
Posts: 16,331
From: Houston, TX
Default

Its pretty easy. You short a service connector under the glove box and count the flashes from the ABS light. That is why it was suggested that you fix the bulb first.
 
Old Mar 3, 2009 | 06:41 AM
  #9  
JimBlake's Avatar
Super Moderator
Joined: May 2006
Posts: 18,398
From: Wisconsin
Default

Find the service check connector & short it with a paperclip, just like you do to read engine error codes. But the ABS light will flash instead of (or along with) the CEL.

When you turn on the key, it flashes like this...
1 flash & long pause - this isn't part of the code yet.

short flashes = first digit of error code
short pause
short flashes = second digit of error code

long pause
short flashes = first digit of next code
short pause
short flashes = second digit of next code

Each code is 2 digits. If the same code repeats, that means it's the only one stored.

After they repeat something like 3 or 4 times, they reset.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
93Accord2.2
General Tech Help
3
Nov 7, 2013 07:10 AM
shipo
Off Topic
14
Feb 9, 2013 08:26 PM
ChicagoBob123
New Member Area
2
Nov 10, 2011 04:44 PM
EBK142
General Tech Help
10
Apr 27, 2010 03:31 PM
DA KID RYU
Appearance
2
Jun 6, 2008 07:14 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:16 AM.