Lock cycling problem.
#1
10-14-2012, 04:41 PM
Lock cycling problem.
https://www.hondaaccordforum.com/for...cycling-48713/
In reference to the above thread.
I am having this problem in my 1996 Accord, the locks are cycling back and forth when locked. I pulled the fuse out, that was the only way to stop it, so my question is how can you tell which actuator has gone bad? Thanks!
In reference to the above thread.
I am having this problem in my 1996 Accord, the locks are cycling back and forth when locked. I pulled the fuse out, that was the only way to stop it, so my question is how can you tell which actuator has gone bad? Thanks!
Last edited by redbull-1; 10-14-2012 at 08:15 PM. Reason: Created new thread for help questions posted in DIY thread.
#2
10-15-2012, 06:04 PM
You can pull the connectors from each door......or make a "leap". If I had the guess - note that word - I'd go with the drivers door actuator.
Thread
Thread Starter
Forum
Replies
Last Post
redbull-1
Do-It-Yourself Section
20
01-07-2015 09:37 AM
jeffradja
General Tech Help
23
05-01-2011 07:25 PM
