Torque converter won't seat
Thread Starter
Joined: Mar 2012
Posts: 7
Torque converter won't seat
Hey everyone I have a 94 accord EX AT. I have having great difficulty getting the torque converter to slide all the way in. It sticks out about 3/16" beyond the bell housing. I've been rotating and pushing until i'm blue in the face. Any tricks? am I missing something? how far beyond the bell housing should it seat?
Been Around A Long Time Member
Joined: Jul 2011
Posts: 1,008
From: Denver
Bookmarked this in case I had problems:
"http://honda-tech.com/showthread.php?t=2896280&highlight=torque+converte r+seal"
But the torque converter gods must have been smiling on me because mine slipped in easy; the first of three clicks/clunks isn't very loud as I recall.
"http://honda-tech.com/showthread.php?t=2896280&highlight=torque+converte r+seal"
But the torque converter gods must have been smiling on me because mine slipped in easy; the first of three clicks/clunks isn't very loud as I recall.
I pull the torque converter out and look behind it and the back side of the bell housing has gouges in it?
Thread
Thread Starter
Forum
Replies
Last Post
